Irving splits into office towers, warehouses, and older streets
Las Colinas tenant work produces cable, light steel, and the hardware of a floor that is being handed back to a landlord. South and west, nearer the airport support shops, the scrap is more industrial: racking, dock steel, and aluminum from a fit-out that changed twice in a decade.
The residential pockets, especially south Irving, still generate ordinary household metal and junk cars on tight lots. A pickup note should say whether the address is a loading dock with a badge reader or a driveway off a residential street.
Local prices vary by yard. Send a photo for a quote. We do not publish a Irving scale sheet.
Dallas–Fort Worth Scrap is an independent referral service that connects you with local scrap yards.
Contractor scrap form · Gold and silver · Cash for cars
Sorting scrap metal in Irving before pickup
At an Irving shop or tenant space, start by separating steel and iron from copper, brass, and aluminum. A magnet is a quick first check: it usually sticks to ferrous metal and not to non-ferrous metal. It is only a sorting aid, not a grade test. Some alloys and attached pieces can confuse the result, so keep uncertain material in a separate pile for the yard to review.
Copper wire and pipe can fall into different grades. Bare bright is clean, uncoated copper wire with no insulation or attachments; #1 and #2 copper allow more contamination or less-clean material under yard rules. Insulated wire is usually evaluated separately, and its value depends on the wire and insulation mix. Removing insulation can take time and create sharp waste, so ask the partner yard whether stripping makes sense before doing it.
Keep brass, aluminum, and copper apart, and remove obvious steel attachments when that can be done safely. Clean material generally means less contamination; paint, solder, plastic, oil, or mixed fasteners may affect how a yard grades it. Do not burn wire to remove insulation. Wear gloves and eye protection when handling cutoffs, and leave sealed or pressurized items for appropriate handling rather than opening them yourself.
Planning an Irving scrap or vehicle pickup
For Las Colinas offices and airport-area shops, send clear photos that show the material, approximate quantity, and any access limits. Include whether the load is indoors, at a dock, or behind a gate, and whether a lift or loading equipment is available. A partner yard can use those details to discuss service and grading, but the site does not buy material or issue a scale ticket.
Before setting out appliances, check whether they contain refrigerant, such as a refrigerator or air conditioner. Refrigerant generally needs proper recovery by qualified handling before the unit is processed; do not cut lines or vent gas. Ask the partner yard what it accepts and whether the appliance must be prepared in a particular way. Keep appliances upright where practical and do not leave loose doors or sharp panels where people can be hurt.
For a junk car, ask the partner yard what ownership documents it requires before arranging removal. Title and paperwork requirements can depend on the vehicle and the yard’s process, so confirm rather than assuming a registration or bill of sale is enough. If a catalytic converter is being offered separately, expect the yard to ask about identification or proof of ownership; do not remove one from a vehicle you do not own.
Questions
How can I tell whether a metal pile is worth separating?
Separate obvious copper, brass, and aluminum from steel before pickup, since mixed material may be graded as a lower-value category. A magnet can help identify much ferrous metal, but it cannot establish a scrap grade. Send photos of unusual or mixed pieces and ask the partner yard how it wants them sorted.
Should I strip insulation from copper wire before bringing it in?
Not automatically. Stripping takes labor and leaves insulation waste, while insulated wire is commonly handled as its own category. The grade and acceptance rules vary by yard and wire type. Ask the partner yard whether it wants the wire intact or stripped, and never burn insulation to expose the copper.
Can I leave a refrigerator or air conditioner with my scrap?
Ask first and describe the appliance. Units with refrigerant need appropriate recovery before processing, and you should not cut refrigerant lines or release gas. A partner yard can tell you whether it accepts the item and what preparation it requires. Keep damaged or sharp parts secured during staging.
What should I have ready when requesting a junk car pickup?
Have the vehicle’s location, condition, make and model if known, and access details ready. Ask the partner yard which title or ownership documents it requires and whether keys are needed. Requirements can vary, so confirm before scheduling. Remove personal belongings and mention blocked access or missing wheels when requesting a quote.
Who weighs the scrap and pays for it?
The independent partner yard handles the scale ticket, material grading, and payment. This site connects sellers with partner yards and does not purchase scrap itself. Yard prices vary, and there is no published local scale sheet here. Confirm the yard’s accepted materials, payment process, and identification requirements before pickup.